Polygreen Play

Playground Foam Pad Underlayment for Artificial Grass

With decades of proven success in commercial playground applications, Polygreen Playground Pad is the ideal underlayment for playgrounds utilizing synthetic turf surfacing.  The impact absorbing padding provides a soft, safe cushioning system beneath the turf as well as other key benefits.

Environmentally Friendly

Polygreen Play is made from 100% recycled, noncontaminated, post industrial cross-linked closed cell polyethylene foam. It is completely free of rubber, lead and heavy metals and is 100% recyclable.


Polygreen Play is completely non-microbial and will perform for years without decay, deformation, mold or fungus growth.

Quick Draining

Polygreen Play’s unique drainage characteristics allows water to drain very rapidly both vertically and laterally so playgrounds stay drier, safer and cleaner. The highly porous material does not absorb water or other liquids so it is ready to be played on shortly after the rain stops - creating more hours of enjoyable play time each year.


Polygreen Play provides consistent ASTM F1292 HIC and GMAX ratings independent of infill used in turf. It is highly elastic and retains its shock absorbing characteristics for many years.


In addition to its safety characteristics, Polygreen Play feature a geotextile on one side to inhibit weed growth and enhance the overall performance of the padding.

Cost Effective

Polygreen Play often reduces the amount of crushed stone required and a single panel covers 24 sq.ft… providing additional time and cost savings.

American Made Quality

Our playground pad is made in the U.S.A. to our exacting standards. Pads are planed on one side to ensure consistent performance and fit and are backed by an 8 year warranty with 2-3 turf cycle life expectancy.

Standard Sizes

Pads are available in 4’ x 6’ panels.


Made from 100% recycled, post industrial foam and is 100% recyclable. Please click on the size to download specifications.

Polygreen Play - Foam Playground Pad & Underlay



  • 1 1/8"
  • 1 1/2"
  • 2 1/8”
  • 2 7/8”

Panel Size

  • 4’ x 6’


  • Drainage Channels

Fall Height Requirements

Below you will find the standards that we use to determine general fall height requirements. If you are needing testing reports for the fall height they will need to be obtained from your turf supplier. True testing must be done once the project has been completely installed over a specific base, pad, turf and sand infill to get an accurate fall height measurement for test reports/certifications.

Stone Base Concrete Base
Up to 6' = 1-1/8" Pad Up to 3' = 1-1/8" Pad
Up to 9' = 2-1/8" Pad Up to 7' = 2-1/8" Pad
Up to 12' = 2-7/8" Pad Up to 8' = 2-7/8" Pad